Aha teď už mi to dává nějaký smysl.
Zkus nejdříve spustit online aktualizaci balíčku reatogoXPE. Neměnil jsi nějaká nastavení v reatogoLogon v některém z boot profilů ? Používáš (máš stažené i jiné shelly) nebo jenom základní Explorer (shel XPE) ?
Tady ti vložím pro orientační přehled nastavení bootprofilu č. 3, který je jako výchozí pro reatogoLogon. Mám jej ovšem trochu upravený podle vlastních potřeb, tak nemusí všechno sedět do puntíku. Tak se na to mrkni a porovnej si to, hlavně nabídku č. 9 co tam máš nastaveno za shell a taky jestli tam nemáš nějaké nesmyslné volby v podobě X a pod.
Tak mě ještě napadlo, že jsi psal, že už máš plnou verzi reatogoXPE a máš zaplou položku "Klasická nabídka Start" na hlavním panelu v položce Jiné volby ?
Reatogo PE Builder ti nehlásí žádnou chybu při vytváření konečného ISO souboru ?
Cesta ke spuštění nastavení reatogoLogon je C:\reatogo-25-6a\plugin\reatogo_Logon\Config_BootProfiles.cmd
BTW. U některých nabídek jsou samozřejmě ještě další podnabídky, ale to už bych se uklikal, kdybych to měl všechno tady vkládat ;o) .
HLAVNI NABIDKA :
==============================================================================
CONFIGURATION of BootProfiles
==============================================================================
[BootProfiles]
------------------------------------------------------------------------------
Current BootProfile descriptions
[1] SIMPLE (Ram, NTFS, RAMDRV data, Nu2Menu)
[2] LIGHT (Ram, NTFS, RAMDRV data, basic PnP)
[3] STANDARD (Ram auto, NTFS, RAMDRV data, basic PnP, Net, 1024x768)
[4] LOW RAM (Pagefile 128M, VDisk 200M, NTFS, RAMDRV data)
[5] SUPER (AutoRam, NTFS, R-data, Pnp full, Net share, RAS, WiFi, 1024x768)
[6] Custom1 (Ram 32M, NTFS-C, R-data, PnP basic, COMPorts, 800x600)
[7] Custom2 (Ram auto, FAT32, RAMDRV data, PnP full)
[8] Custom3 (PF GUI, AutoRam, NTFS, R-data, PnP full, PenetCFG, RAS, 1024)
[9] Custom4 (VDisk 500M, NTFS, RAMDRV data, PnP basic, NET DHCP)
Select a profile to configure with [1-9] or
[D] Set default boot profile (Current Setting: 3)
[T] Set default AutoLogon timeout (Current Setting: 20 seconds)
[I] Import Default BootProfile Settings
[S] Save Current Settings (and return to this dialog)
[X] Exit (without saving changes)
[ ] just hit ENTER to save any changes and exit...
==============================================================================
Type your choice :
Profil č. 3 :
BootProfiles > [3]
------------------------------------------------------------------------------
DESCRIPTION: STANDARD (Ram auto, NTFS, RAMDRV data, basic PnP, Net, 1024x768)
LABEL: Standard
Settings Summary:
1. PageFile Initialization [ ]
2. RAMDRV Volume Initialization [x]
3. RAMDRV Filesystem Initialization [x]
4. PnP Initialization [x]
5. Network Initialization [x]
6. Display Initialization [x]
7. Run Multimedia script [ ]
8. Run Applications script [ ]
9. Logon Shell Explorer
10. AutoLogon timeout (secs) 20
D Set BootProfile description
L Set BootProfile label
X Exit
==============================================================================
Type your choice :
Nabídka č. 1 :
BootProfiles > 3 > [PageFile Initialization]
------------------------------------------------------------------------------
Current status: PageFile Initialization is ENABLED
[-] Disable PageFile Initialization.
[+] Enable PageFile Initialization.
[x] Exit
Type + or - to enable or disable PageFile Initialization
Type {number} of the parameter you want to configure
==============================================================================
Type your choice:
Nabídka č. 2 :
BootProfiles > 3 > [RAMDRV Volume Initialization]
------------------------------------------------------------------------------
Current status: RAMDRV Volume Initialization is ENABLED
[-] Disable RAMDRV Volume Initialization.
[+] Enable RAMDRV Volume Cofiguration.
[1] RAMDRVType = ram
[2] RamDriveSize = 256M
[3] VDiskSize = 300
[4] VDiskHostDrive = $D1
[5] CustomRamDrvInit = 0
[6] CustomRamDrvInitCmd = $empty$
[x] Exit
Type + or - to enable or disable RAMDRV Volume Initialization
Type {number} of the parameter you want to configure
==============================================================================
Type your choice:
Nabídka č. 3 :
Current status: ENABLED
[-] Disable RAMDRV Filesystem Initialization.
[+] Enable RAMDRV Filesystem Initialization.
[1] RAMDRVFormat = NTFS
[2] RAMDRVCreateData = 1
[3] CustomRamDrvFSInit = 0
[4] CustomRamDrvFSInitCmd = $empty$
[x] Exit
Type + or - to enable or disable RAMDRV FileSystem Initialization
Type {number} of the parameter you want to configure
=======================================================================
Type your choice:
Nabídka č. 4 :
BootProfiles > 3 > [PnP Initialization]
--------------------------------------------------------------
Current status: PnP Initialization is ENABLED
[-] Disable PnP Initialization.
[+] Enable PnP Initialization.
[1] PnPDetection = full
[2] HwPNPParams = $empty$
[3] DetectNetDevices = 1
[4] DetectUSBDevices = 1
[5] DetectDisplayDevices = 1
[6] DetectComPorts = 1
[7] CustomPnpInit = 0
[8] CustomPnpInitCmd = $empty$
[x] Exit
Type + or - to enable or disable PnP Initialization
.Type {number} of the parameter you want to configure
==============================================================
Type your choice:
Nabídka č. 5 :
BootProfiles > 3 > [Network Initialization]
-----------------------------------------------------------------
Current status: Network Initialization is ENABLED
[-] Disable Network Initialization.
[+] Enable Network Configuration.
[1] NetworkingGUI = penetcfg
[2] NetGUIParams = /UseProfile:penetcfg-craft.ini
[3] DHCP = 0
[4] RAS = 0
[5] WIRELESS = 0
[6] Sharing = 0
[7] ComputerName = Craft
[8] WorkgroupName = SKUPINA
[9] AdministratorPass = secret
[10] CustomNetInit = 0
[11] CustomNetInitCmd = $empty$
[x] Exit
Type + or - to enable or disable Network Initialization
Type {number} of the parameter you want to configure
=================================================================
Type your choice:
Nabídka č. 6 :
BootProfiles > 3 > [Display Initialization]
------------------------------------------------------------------------------
Current status: Display Initialization is ENABLED
[-] Disable Display Initialization.
[+] Enable Display Configuration.
[1] ResolutionX = 1280
[2] ResolutionY = 1024
[3] MaxBitsPerPixel = 32
[4] MaxRefreshRate = 70
[5] CustomDisplayInit = 0 .
[6] CustomDisplayInitCmd = $empty$
[x] Exit
Type + or - to enable or disable Display Initialization
Type {number} of the parameter you want to configure
==============================================================================
Type your choice:
Nabídka č. 7 :
Type your choice : 7
PARAMETER: "InitMultimedia"
DESCRIPTION: Start custom script for Multimedia initialization
Current value: 0
Supported VALUES: {0} to disable or {1} to enable
-----------------------------------------------------------------
Enter NEW value or SPACE to clear or ENTER to quit :
Nabídka č. 8 :
Type your choice : 8
PARAMETER: "InitApplications"
DESCRIPTION: Start custom script for Applications initialization
Current value: 0
Supported VALUES: {0} to disable or {1} to enable
-----------------------------------------------------------------
Enter NEW value or SPACE to clear or Enter to quit :
Nabídka č. 9 :
Type your choice : 9
PARAMETER: "Shell"
DESCRIPTION: Auto-select a shell in ReatogoLogon Shell list
Current value: Explorer
Supported VALUES: TEXT
-----------------------------------------------------------------
Enter NEW value or SPACE to clear or ENTER to quit :
Nabídka č. 10 :
Type your choice : 10
PARAMETER: "SelectionTimeout"
DESCRIPTION: Number of seconds for Shell Auto-Logon
Current value: 20
Supported VALUES: NUMBER
-----------------------------------------------------------------
Enter NEW value or SPACE to clear or ENTER to quit :
Craft
